EFFECT OF CALCIUM SULFOALUMINATE ADDITIVE ON LINEAR DEFORMATION AT DIFFERENT HUMIDITY AND STRENGTH OF CEMENT MORTARS
PDF

Keywords

shrinkage
cracks
calcium sulfoaluminate additives
expanding additives

Abstract

The effect of calcium sulfoaluminate additives (CSA) on the compression and bending strength of mortar, as well as linear deformation of prism samples at different environmental humidity was studied. Test results indicate that bending strength of mortars with CSA and the referent at the age of 28 days are practically equal. Compressive strength of mortars with CSA reduced by 20 ... 23% for all dosages of CSA. Relative linear deformations depend on the humidity of the environment. At a humidity of 100%, the relative linear deformations are positive and the expansion increases with increasing dosage of the expanding additive. When hardening in dry air at a humidity of 55%, the greatest shrinkage deformations were for mortars with CSA. We can conclude that the expanding effect of CSA is fully manifested at high humidity, i.e. under construction conditions, this means very high-quality moisture care for concrete structures.

https://doi.org/10.37105/iboa.64
PDF

References

1. ACI committee 224 “ Control of cracking in concrete structures” ACI- 224-R
American concrete institute, Farmington hills MI, 2011
2. Baryłka A., Wprowadzenie do zagadnienia problemów techniczno-prawnych eksploatacji obiektów budowlanych. Inżynieria Bezpieczeństwa Obiektów Antropogenicznych nr 1-2, 2019.
3. Baryłka A., The impact of fire on changing the strngth of the underground shelter structure, Rynek Energii nr 1(146), 2020 (str. 71-75).
4. Физико-механические свойства тяжелого самоуплотняющегося бетона: диссертация на соискание ученой степени кандидата технических наук: специальность 05.23.05 Строительные материалы и изделия / Котов Дмитрий Святославович; научный руководитель Блещик Н. П.; Научно-исследовательское Республиканское унитарное предприятие по строительству "Институт БелНИИС"
5. Collepardi М., Borsoi А., Collepardi S., Olagot J.J.O., Troli R. Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions // Cement and Concrete Composites. Vol.27, Issue 6. – 2005. – Pp. 704-708.
6. Н.Н. Калиновская, Д.С. Котов, Е.В. Щербицкая Усадочные деформации модифицированного бетона. Причины и способы устранения // Вестник Полоцкого государственного университета. Серия F. Строительство. Прикладные науки. – 2018. № 8. – С. 43-48.
7. Н.Н. Калиновская, Д.С. Котов, Е.А. Иванова Долговечность бетона. Анализ причин и способы снижения усадочных деформаций модифицированного бетона // Технологии бетонов. – 2017. – № 11-12 (136-137). – С. 14-17.
8. Ramachandran V.S., Feldman R.F. Concrete admixtures handbook. Properties, Science, and Technology // Noyes Publication. USA. 1984, 575 p.
9. СТБ 1335-2002 Цемент напрягающий. Технические условия
10. Obolewicz J.:Evolution of quality in technique, Inżynieria Bezpieczeństwa Obiektów Antropogenicznych ISSN 2450-1859 e-ISSN 2450-8721nr 2(2017) s.8-15
11. Obolewicz J. and Dąbrowski A.: An application of the Pareto Method in Surveys to Diagnose the Managers and Workers Perception of Occupational Safety and Health on Selected Polish Construction Sites, International Journal of Occupational Safety and Ergonomics (JOSE) Vol. 23, no 3 (2017), s.43.
12. Owczarek M., Baryłka A., Determining the thermal diffusivity of the material based on the measurement of the temperature profile in the wall, Rynek Energii nr 4(143), 2019 (str. 76-79).
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.